Mon projet d'installation lifting 208 SMEG+ avec vidéo
28 messages
• Page 1 sur 1
Mon projet d'installation lifting 208 SMEG+ avec vidéo
Bonjour
Je voudrais partager mon propre projet 208 de lifting que je fais depuis mai de cette année .
J'ai pris les meilleures caractéristiques des véhicules Citroën / Peugeot et monté sur ma 208
Peu plus de travail sur l'assiette autour de l'écran tactile de besoin, mais presque fini !
c4 picasso - écran 12 "
308 T9 - Smeg + et l'écran
308 T9 - Blind sdpot montiroring
308 T9 - Caméra de recul
308 T9 - Baie de parking automatique aider
308 T9 Led feux de flaque d'eau
308 T9 LED ambiance interne
308 T9 Denon système hi-fi
308 T9 - Volant
DS4 - miroirs de mémoire dans la marche arrière .
508 - Auto / phares sur trempage
pour faire
Mains libres évaluer et de départ
Aider Artiv vitesse de radar
Lane alerte demandant
Massez sièges avant
http://youtu.be/BNuJxyLzlbA
http://youtu.be/CyDbcaGnZCw
Merci pour la recherche
David
Je voudrais partager mon propre projet 208 de lifting que je fais depuis mai de cette année .
J'ai pris les meilleures caractéristiques des véhicules Citroën / Peugeot et monté sur ma 208
Peu plus de travail sur l'assiette autour de l'écran tactile de besoin, mais presque fini !
c4 picasso - écran 12 "
308 T9 - Smeg + et l'écran
308 T9 - Blind sdpot montiroring
308 T9 - Caméra de recul
308 T9 - Baie de parking automatique aider
308 T9 Led feux de flaque d'eau
308 T9 LED ambiance interne
308 T9 Denon système hi-fi
308 T9 - Volant
DS4 - miroirs de mémoire dans la marche arrière .
508 - Auto / phares sur trempage
pour faire
Mains libres évaluer et de départ
Aider Artiv vitesse de radar
Lane alerte demandant
Massez sièges avant
http://youtu.be/BNuJxyLzlbA
http://youtu.be/CyDbcaGnZCw
Merci pour la recherche
David
Dernière édition par bold1342 le 23 Octobre 2014, 21:41, édité 3 fois au total.
- bold1342
- Nouveau
- Messages: 16
- Inscription: 10 Mai 2013, 09:10
Re: 208 ma propre smeg lifting et Cirocco
Va falloir tout re démonter, t'a pas mis le volant au bon endroid
Plus sérieusement, il y a un sacré boulot, c'est impressionnant. Mais je n'aime pas du tout l'ATH ici.
Plus sérieusement, il y a un sacré boulot, c'est impressionnant. Mais je n'aime pas du tout l'ATH ici.
-
loico - Lionceau
- Messages: 630
- Inscription: 07 Mars 2014, 10:23
- Véhicule: 208 Feline VTI 120 Bleu virtuel
Re: 208 ma propre smeg lifting et Cirocco
Mais... t'es un grand malade toi!
208 Féline THP 156 de 2013 VENDUE 406 Coupé HDi de 2002 Fiat Barchetta de 1997
Mon ex-208 : http://www.feline208.net/forum/viewtopic.php?f=35&t=5378
Les autres : http://www.feline208.net/forum/viewtopic.php?f=17&t=9326
Mon ex-208 : http://www.feline208.net/forum/viewtopic.php?f=35&t=5378
Les autres : http://www.feline208.net/forum/viewtopic.php?f=17&t=9326
-
oolon31 - Modérateur
- Messages: 1828
- Inscription: 09 Mars 2014, 18:02
- Localisation: Владивосток
- Véhicule: 406 Coupe HDi Fiat Barchetta
Re: 208 ma propre smeg lifting et Cirocco
Et dire que quand je voit ca, c'est déjà une frankeinstein... Là c'est quand même un travail incroyable.
https://www.dropbox.com/s/x18o1vv1i4q0q ... 3.jpg?dl=0
https://www.dropbox.com/s/x18o1vv1i4q0q ... 3.jpg?dl=0
-
loico - Lionceau
- Messages: 630
- Inscription: 07 Mars 2014, 10:23
- Véhicule: 208 Feline VTI 120 Bleu virtuel
-
h4ni - Lionceau
- Messages: 556
- Inscription: 21 Décembre 2012, 14:20
- Localisation: Algérie
- Véhicule: 208 Allure Hdi 92ch
Re: 208 ma propre smeg lifting et Cirocco
Incroyable Un sacré boulot !
De quel pays nous viens-tu ? (Where are you from in English )
Edit : from UK as I see on the licence plates
De quel pays nous viens-tu ? (Where are you from in English )
Edit : from UK as I see on the licence plates
-
Calimero - DiCCtateur
- Messages: 10262
- Inscription: 26 Février 2011, 14:05
- Localisation: Pa(g)ris
Re: 208 ma propre smeg lifting et Cirocco
Je suis du Royaume-Uni Angleterre : - )
- bold1342
- Nouveau
- Messages: 16
- Inscription: 10 Mai 2013, 09:10
Re: 208 ma propre smeg lifting et Cirocco
Excellent boulot. Vraiment remarquable je suis bouchebé c'est le mot
- mehdi-208
- Lionceau
- Messages: 718
- Inscription: 30 Mai 2013, 12:03
- Localisation: Algérie
- Véhicule: 208 Allure 1.6 HDI 92ch
Re: 208 ma propre smeg lifting et Cirocco
bold1342 a écrit:Je suis du Royaume-Uni Angleterre : - )
Peut tu poster d'autres photos?
-
h4ni - Lionceau
- Messages: 556
- Inscription: 21 Décembre 2012, 14:20
- Localisation: Algérie
- Véhicule: 208 Allure Hdi 92ch
Re: 208 ma propre smeg lifting et Cirocco
loico a écrit:Et dire que quand je voit ca, c'est déjà une frankeinstein... Là c'est quand même un travail incroyable.
https://www.dropbox.com/s/x18o1vv1i4q0q ... 3.jpg?dl=0
J'aime vos roues de Citroen DS3 ou DS4 ?
- bold1342
- Nouveau
- Messages: 16
- Inscription: 10 Mai 2013, 09:10
Re: 208 ma propre smeg lifting et Cirocco
h4ni a écrit:bold1342 a écrit:Je suis du Royaume-Uni Angleterre : - )
Peut tu poster d'autres photos?
Bonjour, oui je vais prendre plus de photos et de poster dos
- bold1342
- Nouveau
- Messages: 16
- Inscription: 10 Mai 2013, 09:10
Re: Mon projet d'installation lifting 208 SMEG+
Euh On peut avoir une vidéo avec allumage des feux, passage marché arrière pour la caméra ...etc car il y a du travail
- bs208
- Accro du lion
- Messages: 1729
- Inscription: 14 Mars 2014, 19:18
- Véhicule: 308 GTline
Re: 208 ma propre smeg lifting et Cirocco
bold1342 a écrit:loico a écrit:Et dire que quand je voit ca, c'est déjà une frankeinstein... Là c'est quand même un travail incroyable.
https://www.dropbox.com/s/x18o1vv1i4q0q ... 3.jpg?dl=0
J'aime vos roues de Citroen DS3 ou DS4 ?
DS3.
Mais ce sont des voitures de service dans le parking de l'usine à Poissy. Les pièces sont assemblées au hasard, en fonction des stocks.
(I can say it in english if it's easier to understand )
-
loico - Lionceau
- Messages: 630
- Inscription: 07 Mars 2014, 10:23
- Véhicule: 208 Feline VTI 120 Bleu virtuel
Re: 208 ma propre smeg lifting et Cirocco
loico a écrit:Les pièces sont assemblées au hasard, en fonction des stocks.
Des chances donc de trouver une 208 avec un V6 HDi?
208 Féline THP 156 de 2013 VENDUE 406 Coupé HDi de 2002 Fiat Barchetta de 1997
Mon ex-208 : http://www.feline208.net/forum/viewtopic.php?f=35&t=5378
Les autres : http://www.feline208.net/forum/viewtopic.php?f=17&t=9326
Mon ex-208 : http://www.feline208.net/forum/viewtopic.php?f=35&t=5378
Les autres : http://www.feline208.net/forum/viewtopic.php?f=17&t=9326
-
oolon31 - Modérateur
- Messages: 1828
- Inscription: 09 Mars 2014, 18:02
- Localisation: Владивосток
- Véhicule: 406 Coupe HDi Fiat Barchetta
Re: Mon projet d'installation lifting 208 SMEG+
Ok. Je vais rajouter "bon marché", ou "invendables"
-
loico - Lionceau
- Messages: 630
- Inscription: 07 Mars 2014, 10:23
- Véhicule: 208 Feline VTI 120 Bleu virtuel
Re: Mon projet d'installation lifting 208 SMEG+ MISE À JOUR
MISE À JOUR avec vous des liens tube de vidéo en 1080p démontrant ainsi le smeg et écran 12 " TFT
- bold1342
- Nouveau
- Messages: 16
- Inscription: 10 Mai 2013, 09:10
Re: Mon projet d'installation lifting 208 SMEG+ MISE À JOUR
we are waiting for the links ....
- mehdi-208
- Lionceau
- Messages: 718
- Inscription: 30 Mai 2013, 12:03
- Localisation: Algérie
- Véhicule: 208 Allure 1.6 HDI 92ch
Re: Mon projet d'installation lifting 208 SMEG+ avec vidéo
Impressionnant Tu as les caméras pour la vue à 360° ?
Very impressive Do you have the 360° vision cameras ?
Very impressive Do you have the 360° vision cameras ?
-
Calimero - DiCCtateur
- Messages: 10262
- Inscription: 26 Février 2011, 14:05
- Localisation: Pa(g)ris
Re: Mon projet d'installation lifting 208 SMEG+ avec vidéo
J'ai le câblage en place - juste besoin de l'écu 360 de vision et caméras ( très coûteux) : - )
- bold1342
- Nouveau
- Messages: 16
- Inscription: 10 Mai 2013, 09:10
Re: Mon projet d'installation lifting 208 SMEG+ avec vidéo
bold1342 a écrit:J'ai le câblage en place - juste besoin de l'écu 360 de vision et caméras ( très coûteux) : - )
Bonjour,
Tu peut nous dire qu'elle est la modification la moins cher parmi celles que t'a fait?
-
h4ni - Lionceau
- Messages: 556
- Inscription: 21 Décembre 2012, 14:20
- Localisation: Algérie
- Véhicule: 208 Allure Hdi 92ch
Re: Mon projet d'installation lifting 208 SMEG+ avec vidéo
A vue d'oeil je dirai la lumière violette dans les poignées de portes intérieures
-
loico - Lionceau
- Messages: 630
- Inscription: 07 Mars 2014, 10:23
- Véhicule: 208 Feline VTI 120 Bleu virtuel
Re: Mon projet d'installation lifting 208 SMEG+ avec vidéo
Beautiful, good job
-
didibur - Modérateur
- Messages: 3429
- Inscription: 21 Octobre 2012, 15:52
- Localisation: Rhodanie
- Véhicule: T91
Re: Mon projet d'installation lifting 208 SMEG+ avec vidéo
Pose ta candidature chez Peugeot.
http://www.feline208.net/forum/viewtopic.php?f=11&t=3302Team Noir Jaune Rouge
http://www.facebook.com/pages/Picture-of-Francois-Bury/136558133715Ma Page Photo
http://www.facebook.com/pages/Picture-of-Francois-Bury/136558133715Ma Page Photo
- Maxwel86
- Petit Félin
- Messages: 106
- Inscription: 23 Février 2014, 19:46
- Localisation: Mons - Belgique
- Véhicule: Peugeot 208 Allure 16 VTI 120 CH 5 portes blanc banquises
Re: Mon projet d'installation lifting 208 SMEG+ avec vidéo
Ah ouais quand même, sacré lifting... et ça rend bien en plus J'imagine le boulot niveau réseaux de communication, câblage, intégration, etc...
Well done guy
Well done guy
-
Erendil - Nouveau
- Messages: 46
- Inscription: 11 Août 2014, 22:20
- Véhicule: 208 XY THP 155 Noir Perla
Re: Mon projet d'installation lifting 208 SMEG+ avec vidéo
Hi David,
That's really amazing !
Is it fully functional ? Don't you have any malfunctions or things that prevent you to drive peacefully without the risk to having an accident ?
Personally I'm a programmer then I understand you can replace and plug those parts because they are enough standardized but what about the sensors, calculators and all the embedded software that is supposed to be adapted to some configurations but not for all ?
According to the bugs you can get sometimes, with genuine and well adjusted configurations, I think I wouldn't be zen with that custom set. I'm just guessing... maybe the core system is perfectly isolated from the dashboard, then there is no risk to get some kind of interferences between it and the SMEG+... I don't know.
Did you need to reprogramme or change some software settings ?
How did you get the idea to hack your car like that ? Are you an automotive engineer ?
That's really amazing !
Is it fully functional ? Don't you have any malfunctions or things that prevent you to drive peacefully without the risk to having an accident ?
Personally I'm a programmer then I understand you can replace and plug those parts because they are enough standardized but what about the sensors, calculators and all the embedded software that is supposed to be adapted to some configurations but not for all ?
According to the bugs you can get sometimes, with genuine and well adjusted configurations, I think I wouldn't be zen with that custom set. I'm just guessing... maybe the core system is perfectly isolated from the dashboard, then there is no risk to get some kind of interferences between it and the SMEG+... I don't know.
Did you need to reprogramme or change some software settings ?
How did you get the idea to hack your car like that ? Are you an automotive engineer ?
- Catching
- Nouveau
- Messages: 16
- Inscription: 31 Octobre 2014, 22:44
- Localisation: Aix en Provence
- Véhicule: 208 Feline Gris Metallise
Re: Mon projet d'installation lifting 208 SMEG+ avec vidéo
Hello
Yes the system is fully functional with no malfunctions, the extra features such as blind spot monitoring and camera give a safer driving experience. Having the sat nav map in front of driver is less distracting than having to look at touchscreen.
From my research for the following vehicles 508, 308 T9 (2014) 208, 2008, C4 Picasso (b78) 2014, DS4, DS5 and c4 Cactus they all use AEE2010 and PSA have developed two multiplex systems which operate very similar.
(1) A cheaper Eco multiplex for 208, 2008, cactus, DS4 and some lower end 308 T9 and C4 Picasso B78 (2014)
(2) A fully multiplexed option they use in higher end vehicles allows extra features such as hands free access starting and distance control radar etc.
The heart of the system is the BSI unit which while part numbers and software version differ are basically the same computer boxes with various CAN networks. It is feesable to add any feature you want across the range as long as the BSI software is latest version. Each component like 12" screen and Smeg plus can be specifically configured to map feature set for the car it is installed in! for example you can enable or disable the ECO stop and start etc so the fuction is masked if hardware not available.
I have found adding components work as plug and play - example the 12" dash colour screen from C4 B78 uses same connector as 208 however much time is needed to study wiring diagrams and the wiring pins are sometimes in wrong sequence. When component is added to the system I use PSA Diagtool to manipulate to work via 208. A bit fiddly but possible for all ECU so far!
This weekend I'm installing the 360 panoramic camera system from C4 Picasso B78. This works on the ECO multiplexed system and is seamless. I will upload another You Tube video ASAP.
My next challenge to upgrade my 208 to fully multiplexed system so I can add the remaining features.
I am not engineer just an enthusiast! I spend almost a year researching testing and working on my car - I must have some madness
Yes the system is fully functional with no malfunctions, the extra features such as blind spot monitoring and camera give a safer driving experience. Having the sat nav map in front of driver is less distracting than having to look at touchscreen.
From my research for the following vehicles 508, 308 T9 (2014) 208, 2008, C4 Picasso (b78) 2014, DS4, DS5 and c4 Cactus they all use AEE2010 and PSA have developed two multiplex systems which operate very similar.
(1) A cheaper Eco multiplex for 208, 2008, cactus, DS4 and some lower end 308 T9 and C4 Picasso B78 (2014)
(2) A fully multiplexed option they use in higher end vehicles allows extra features such as hands free access starting and distance control radar etc.
The heart of the system is the BSI unit which while part numbers and software version differ are basically the same computer boxes with various CAN networks. It is feesable to add any feature you want across the range as long as the BSI software is latest version. Each component like 12" screen and Smeg plus can be specifically configured to map feature set for the car it is installed in! for example you can enable or disable the ECO stop and start etc so the fuction is masked if hardware not available.
I have found adding components work as plug and play - example the 12" dash colour screen from C4 B78 uses same connector as 208 however much time is needed to study wiring diagrams and the wiring pins are sometimes in wrong sequence. When component is added to the system I use PSA Diagtool to manipulate to work via 208. A bit fiddly but possible for all ECU so far!
This weekend I'm installing the 360 panoramic camera system from C4 Picasso B78. This works on the ECO multiplexed system and is seamless. I will upload another You Tube video ASAP.
My next challenge to upgrade my 208 to fully multiplexed system so I can add the remaining features.
I am not engineer just an enthusiast! I spend almost a year researching testing and working on my car - I must have some madness
- bold1342
- Nouveau
- Messages: 16
- Inscription: 10 Mai 2013, 09:10
Re: Mon projet d'installation lifting 208 SMEG+ avec vidéo
Traduction
That's great David, thank you for those precisions.
Yes you're mad !
Just an enthusiast ? Really ? You're kidding me Maybe you're not an engineer but I suppose you're close enough the automotive domain, don't you ? How do you get informations about the car systems ? As an enthusiast this might not be so easy... Do you have friends or family that can help you ? You can't find everything you need on the Internet I guess.
I'm just curious, I'd love to hack my 208 like that but nothing that dismantling the SMEG, without the appropriate tools, scares me.
Good job ! Just go on and show us your madness
Traduction :
bold1342 a écrit:Oui, le système est entièrement fonctionnel, sans dysfonctionnement. Les fonctionnalités supplémentaires telles que la surveillance d'angle mort et la caméra donnent une expérience de conduite plus sûre. Avoir la carte de navigation par satellite devant soit est moins gênant que d'avoir à regarder l'écran tactile.
D'après mes recherches pour les véhicules suivants 508, 308 T9 (2014) 208, 2008, C4 Picasso (B78) 2014, DS4, DS5 et C4 Cactus, ceux-ci utilisent tous l'AEE 2010 et PSA a développé deux systèmes multiplexés qui fonctionnent de façon très similaire.
(1) Un multiplexeur ECO moins cher pour 208, 2008, Cactus, DS4 et certains modèles d'entrée de gamme 308 T9 et C4 Picasso B78 (2014)
(2) Une option totalement multiplexée, utilisée dans des véhicules de gamme plus élevée, permet des fonctionnalités supplémentaires telles que l'accès et démarrage mains libres, le radar de contrôle de distance, etc.
Le cœur du système étant l'unité BSI et bien que le nombre de pièces et les versions logicielles diffèrent, celui-ci demeure globalement le même calculateur avec des variantes de bus CAN. Au sein de la gamme, il est possible d'ajouter n'importe quelle fonctionnalité souhaitée, tant que le logiciel du BSI est dans la bonne version [NDT : "la dernière" dit David mais à mon avis il faut surtout que ce soit cohérent]. Chaque composant comme l'écran 12 "et le SMEG+ peut être configuré spécifiquement selon la cartographie du véhicule dans lequel il est installé ! Par exemple, vous pouvez activer ou désactiver le mode ECO (stop & start) etc et masquer cette fonctionnalité en l'absence du matériel correspondant.
Finalement, j'ai compris que l'ajout de composants se faisait de façon Plug and Play - par exemple l'écran de bord couleur de 12" du C4 B78 utilise le même connecteur que la 208, cependant, il m'a fallu un certain temps pour étudier les schémas de câblage et les schémas des broches, sachant que ces dernières ne sont pas toujours dans le bon ordre. Après l'ajout d'un composant, j'utilise PSA Diagtool pour le faire fonctionner avec la 208. C'est assez délicat mais ça reste possible pour tous les ECU !
Ce week-end je vais installer le système de caméra panoramique 360 du C4 Picasso B78. Ca fonctionne sans problème sur le système multiplexé ECO. Je téléchargerai une autre vidéo sur Youtube dès que possible.
Mon prochain défi sera de faire en sorte que le système de ma 208 soit entièrement multiplexé, de manière à pouvoir ajouter les fonctionnalités restantes.
Je ne suis pas ingénieur, seulement un passionné ! J'ai passé près d'un an à faire des recherches, des tests et travailler sur ma voiture - Je dois être un peu fou
That's great David, thank you for those precisions.
Yes you're mad !
Just an enthusiast ? Really ? You're kidding me Maybe you're not an engineer but I suppose you're close enough the automotive domain, don't you ? How do you get informations about the car systems ? As an enthusiast this might not be so easy... Do you have friends or family that can help you ? You can't find everything you need on the Internet I guess.
I'm just curious, I'd love to hack my 208 like that but nothing that dismantling the SMEG, without the appropriate tools, scares me.
Good job ! Just go on and show us your madness
Traduction :
C'est super David, merci pour ces précisions.
Oui t'es un fou !
Juste un passioné ? Vraiment ? Tu te moques de moi Tu n'es peut-être pas un ingénieur mais j'imagine que tu es suffisamment proche du domaine de l'automobile, n'est-ce pas ? Comment obtiens-tu les informations sur les systèmes des voitures ? En tant que passionné ça ne doit pas être si simple... As-tu de la famille ou des amis qui peuvent t'aider ? On ne peut pas tout trouver sur Internet je suppose.
Je suis juste curieux, j'adorerais hacker (trafiquer) ma 208 comme ça mais rien que le fait de démonter le SMEG sans avoir les outils appropriés m'effraie.
Bon boulot ! Continue et montre-nous ta folie
- Catching
- Nouveau
- Messages: 16
- Inscription: 31 Octobre 2014, 22:44
- Localisation: Aix en Provence
- Véhicule: 208 Feline Gris Metallise
Re: Mon projet d'installation lifting 208 SMEG+ avec vidéo
Bonjour,
Est ce que quelqu'un a le PintOut du touchcreen continental du smeg+ ?
Is there anybody which have smeg+ touchescreen pinout ?
Est ce que quelqu'un a le PintOut du touchcreen continental du smeg+ ?
Is there anybody which have smeg+ touchescreen pinout ?
- stygre
- Nouveau
- Messages: 4
- Inscription: 16 Juin 2015, 11:07
- Véhicule: DS3 Racing
28 messages
• Page 1 sur 1
Qui est en ligne
Utilisateurs parcourant ce forum: Aucun utilisateur enregistré et 1 invité