erick314 a écrit:h4ni,
my quadlock connector doesn't have that brown wire with label "REAR 12V OUT". I really don't know what is that . Sorry . I guess your cable is different from mine.
I hope that next thursday I will be able to test my rear camera again.
Hello Erick
The Brown wire are :
erick314 a écrit:erick314 a écrit:
h4ni,
for the video interface, you don´t need to get 12v. The quad lock connector is ready for use, Plug and Play.
For the reverse camera:
- brown wire, where drawing shows ACC 12V, you don´t need to use. Don´t connect it anywhere
- black wire, for Ground you can just connect to ground. Easily.
- green wire, for the reverse camera: I got it from the reverse light in the lamp. I guess the problem I have about camera noise is because of this connection. I need to get 1 day off at office to remove the interface and remove the green wire. I think that I don´t need that wire. Maybe if it is not connected, it will also work. Need to check it. I believe first week of January I will have 1 day off to try that.
In my case, two brown wire on the same pin
ps: the scheme of the camera is made by myself, not by Ryan